ST-2090D Digital Soldering Station
80W soldering station with LED display
2 in 1 design of soldering station and soldering iron stand. MCU controlled temperature calibration with PID system equipped. Four-core ceramic heater. Support and F switchable. Scientific ergonomic handle, comfortable to hold. Temperature lock function, auto standby and sleep function
Features
Easy Temperature Setting It can adjust temperature rapidly by temperature knob, the setting temperature will be shown when adjusting temperature, the real temperature of soldering tip will be displayed after stopped adjusting temperature for 3 seconds.
Temperature range is 80~480.
Temperature Lock Function Press LOOK/ / button for 3 seconds at the same time, current temperature will be locked and display LOC for locking temperature. It can unlock by pressing LOOK/ / button for 3 seconds again.
Auto Standby Function When the soldering not in use and put the soldering iron on the iron holder, it will auto standby after 10 minutes, heater temperature will drop to 200 , nixie tube display STB, pick up the soldering iron and back to normal working mode.
Auto Standby Function In auto standby mode, the soldering station will auto sleep after 20 minutes, nixie tube display SLP, it will get back to normal work mode by adjusting the knob or pressing the button.
Fault Alarm Function E02 shown on the display screen means there is error for sensor.
| Specifications | |
|---|---|
| Model | ST-2090D |
| Power consumption | 80W |
| Voltage | 110VAC/220VAC ±10% 50Hz/60Hz |
| Display method | LED |
| Temperature range | 80 ~480 /176 ~896 |
| Temperature offset range | ±50 (±90 ) |
| Temperature stability | ±2 at idle temperature |
| Tip to ground resistance | <2Ω |
| Tip to ground potential | <2mV |
| Temperature accuracy | ±15 |
| Temperature adjustment | Knob control |
| Heating element | Four-core PTC heater |
| Soldering tip | T900-B |
| Dimensions | 20*18*12.5 cm |
| Net weight | 0.7kg |