Soldering

ST-8800D Hot Air Station

800W hot air rework station with LCD display.

3 set shortcut air volume/temperature to simplify operations. Support temp lock, temp calibration. Support and switchable. Auto standby and sleep funtion, conserves energy and protect equipment. Password-protected function to preserve settings. With 10~900s timing function. Cold air function to cool components. Cooling automatic function(standby), effectively protects the life span of heating core and handle.

Features

Easy Temperature/Air Flow Setting

1. Adjust the air flow value by AIR knob, "+" / "-" to increase/reduce the air volume.

2. Adjust the temperature value by pressing “ ” or “ ”, long press can be quickly adjusted.

Saving and Call Shortcut Temperature Press button “1”/ “2”/ “3” to call or save preset temperature and air flow value.

Timing function Under the HT menu, press “ ” and “ ” keys to adjust the timing function working time. The setting time is 10 - 900 seconds.

Standby Function The hot air gun stand-by function can adjust in menu, “---” means standby. The hot air gun blows at the maximum air volume when the handle is placed on the holder, then enter stand-by status when the temperature drops under 100 ° C or stop heating after 15 seconds. The machine will return to work when picking up the handle.

Auto-sleep function The hot air station will automatic enter the sleep status and display OFF after 30 minutes of no activity, and it won't re-work when the handle dropped or picked up until press any button to awaken.

Temperature Lock Function Under Loc Menu, it can turn on/off temperature lock function by pressing “ ” or “ ” key.

0C/0F available In menu C-F mode, it can switch temperature unit / by pressing “ ” or “ ” key.

Temperature Calibration Under menu CAL mode, press “ ”or“ ” key to adjust the value. Calibration range is -50 ~ 50 (-90 ~90 ). Calibration value will be negative as actual-measured temperature is lower than setting temperature; Calibration value will be positive as actual-measured temperature is higher than setting temperature.

Beeping function Under menu BL mode, it can turn on/ off the beeping function by pressing “UP” or “DOWN”key.

Password Setting Function In PSD menu, press “ ” or “ ” to adjust password setting value, which can be set from 01 to 999. “00” means password function is off. Default no password for the first time entrance. (Note: Directly input 906 password to enter menu in case of forgot the password.)

Fault alarm function S-E Sensor fault. H-E Heating element fault.