ST-862D-E High Power Hot Air Station with Fault Alarm Function
LCD display screen making control visualization.
Temperature unit switching function. Temperature locking, timed work function. MCU controlled temperature calibration, compensation for constant working. Strong air volume with brushless fan. Easy to replace with pluggable heater. Convertible with straight air and spiral air. Auto-sleep function. Fault Alarm Function，the warning light will sound and flash to indicate when there is a fault.
Features
Easy Temperature Setting Press air “up” or “down” key to adjust the air volume and temperature. Long press for quickly adjusting. Stop pressing the key for 3 seconds, it will save the setting automatically.
The cool air function is used when the temperature setting value under 100 0C
Saving and Call Shortcut Temperature Press button “1”/ “2”/ “3” to call or save preset temperature and air flow value.
Temperature Lock Function Under Menu Loc, it can turn on or off temperature lock function by pressing “UP” or “DOWN” key; then press Button “2” to exit and save your setting.
0C/0F available In menu C-F mode, it can switch temperature unit / by pressing “UP” or “DOWN” key.
Temperature Calibration Under menu CAL mode, press “UP”or“DOWN” key to enable temperature calibration function, which calibration range is -500C~ 500C(-900F~900F). Calibration value will be negative as actual-measured temperature is lower than setting temperature; Calibration value will be positive as actual-measured temperature is higher than setting temperature.
Beeping function Under menu BL mode, it can turn on/ off the beeping function by pressing “UP” or “DOWN”key
Timing function Under menu HTO mode, it can adjust time of timing function by pressing “UP” or “DOWN” key. Time range from 10 to 900 seconds
Standby Function In menu STBY, press “UP” or “DOWN” can adjust standby function on or off. It can adjust the standby time from 1 to 10mins. When standby function is on, this handle can be shut off automatically when putting it on this holder. If within standby time, taking this handle out of holder it will recover to work; if beyond the standby time, it won't work until pressing the button on hot air gun. (Note: if both timing function and standby function are on simultaneously, timing function will be recount time when the hot air gun working. )
| Fault alarm function | |
|---|---|
| E2 | Sensor open circuit — Poor contact of air gun connector or handle. Replace the heater. |
| E3 | No signal of zero-cross — The zero-cross circuit is damaged and needs repair. |
| E7 | Sensor short circuit — A short circuit occurred in the temperature sensor or the heating core is open. Replace the heating element. |
| E8 | Over temperature protection:
1. Temperature sensor abnormal — replace the heating core. 2. Heating core temperature too high — allow it to cool, then restart the machine. |
| E10 | Heater overheating — Needs repair. |
| E11 | Fan broken — Needs repair. |
| E13 | Heating output switch component failed — Needs repair. |
| Specifications | |
|---|---|
| Model | ST-862D-E |
| Power Consumption | 1000W (MAX) |
| Input Voltage | 110VAC/220VAC ±10% 50Hz/60Hz optional |
| Temperature Range | 100–480°C / 212–896°F |
| Setting Range of Volume | 1–99% |
| Air Flow | 20–120 L/min |
| Standby Heater Cooling Function | Support |
| Beeping Function | Available |
| Standby Function | Available |
| Timing Function | Available |
| Shortcut Temperature / Air Flow | 3 sets shortcut temperatures / air flow for quick selection |
| Temperature Calibration | ±50°C / ±90°F |
| Temperature Adjustment | 10 digits (Coarse) / 1 digit (Fine-tuning) |
| Air Flow Adjustment | 2 digits (Coarse) / 1 digit (Fine-tuning) |
| Working Conditions | Temperature 0–40°C, relative humidity <80% |
| Storage Conditions | Temperature -20–80°C, relative humidity <80% |
| Auto-Sleep Function | Available |
| Dimensions | 21 × 17.4 × 15 cm |
| Net Weight | 3.34 kg |