Soldering

GT-1028 Intelligent Hot Air Station

Large TFT color screen, more convenient to set and monitor para meters.

1300W pluggable ceramic heater,heating fast. Equipped with a vacuum suction pen,components can be extracted after desoldering. Built-in brushless fan, long use life and low noise. PID algorithm temperature control, accurate and stable temperature. Infrared temperature calibration function. Temperature curve setting function. 3 sets shortcut air volume/temperature to simplify operations. Support control the switch on and off of the smoke purifier. Can be controlled by external pedal. Built-in RS-485 communication interface, support IoT function.

Features

Language Setting Parameter Lock Temperature Unit Switchable Temperature Compensation Foot Switch Mode Heating Mode Cool Air Function IR Temperature Calibration Function

Specifications
Rated Operating Voltage AC 230V ±10% 50Hz / (110V ±10% 60Hz)
Power 1330W (220–240V~) / 1000W (110–120V~)
Fuse T8A (AC 250V) / T12A (AC 125V)
Temperature Range 100 ~500°C / 212 ~932°F
Air Volume Range 1% ~ 100%
Timing Time 10 ~ 900s (Can be turned off)
Temperature Unit °C / °F (default °C)
Vacuum Pressure -60 KPa
Air Flow 120 L / Min (Max)
Alarm and Protection Functions Heater open circuit alarm, sensor fault alarm, zero crossing signal alarm,
SCR damage alarm, over-temperature protection alarm
Password Protection Function Available (Off by default)
Alarm Function Available (On by default)
User Temperature Compensation ±50°C / ±90°F
Language Chinese / English
Heating Power Display 5 dynamic power bars
Temperature Adjustment Step Long press: 10-unit adjustment
Short press: 1-unit adjustment
Air Volume Adjustment Step Long press: 2-unit adjustment
Short press: 1-unit adjustment
Rapid Temperature / Air Volume / Time 3 groups of temperature, air volume, and time settings for quick recall
Working Conditions Temperature: 0 ~40°C
Relative Humidity: <85% RH
Dimensions 230 (L) × 142 (W) × 145 (H) mm
Weight (Net Weight) Approx. 4 kg